A subquery is a complete SELECT command which is used within another SELECT, UPDATE, INSERT or DELETE command. The only difference to a simple SELECT is, that it is enclosed in parenthesis.
Depending on the type of the created result there are three classes of subqueries:
(SELECT max(weight) FROM person).
(SELECT min(weight), max(weight) FROM person).
(SELECT lastname, weight FROM person). For the classification it makes no difference whether the resulting list contains zero, one or more rows. The demarcation between a table subquery and a row subquery is that potentially more than one row may occur.
Every type can be used on all positions where the type it stands for may occur: the scalar value subquery where a single value may occur, the row subquery where a single row may occur and the table subquery where a table may occur. Additionally table subqueries may occur as an argument of an EXISTS, IN, SOME, ANY or ALL predicate.
Independent from this classification subqueries may be correlated subqueries or non-correlated subqueries. Correlated subqueries have a correlation to the surrounding query by the fact that they use values from the surrounding query within the subquery. Non-correlated subqueries are independent from the surrounding query. This distinction is shown in detail in the next chapter but applies also to the other two subquery classes.
Because correlated subqueries use values, which are determined by the surrounding query and may change from row to row, the subquery is executed - conceptually - as often as resulting rows of the surrounding query exist. This might lead to performance problems. Nevertheless correlated subqueries are an often used construct. In many cases exist equivalent constructs which use a JOIN. Which one shows the better performance depends highly on the DBMS, and the number of involved rows, the existence of indices and a lot more variables.
The first example creates a list of lastnames, weights and the average weight of all persons.
SELECT id, lastname, weight, (SELECT avg(weight) FROM person) -- this is the subquery FROM person ORDER BY lastname;
Because the subquery uses the
avg function, the SQL compiler knows that it will return exactly one single value. Therefore it's type is Scalar Value Subquery and can be used on positions where scalar values may occur, e.g. in the list between SELECT and FROM.
In the next example the subquery is used as a deputy for a value within the WHERE clause.
-- Persons who weigh more than the average of all persons SELECT id, lastname, weight FROM person WHERE weight >= (SELECT avg(weight) FROM person) -- another position for the subquery ORDER BY lastname;
Both examples use the table person twice. Just as well one can use different tables. There is no dependency between the table name in the subquery and in the surrounding query. This applies to all classes of correlated and non-correlated subqueries. The subqueries may retrieve any value from any other table, e.g. the number of contacts.
This first two examples show non-correlated subqueries, which means, that the subqueries are independent from the queries in which they are embedded. They are executed only once.
But often an application faces a situation, where the subquery must use values from the outside query (similar to subroutines which uses parameters). This kind of subquery is called a correlated subquery. As an example the next query lists persons together with the average weight of their family.
SELECT id, firstname, lastname, weight, (SELECT avg(weight) FROM person sq -- 'sq' is an arbitrary alias name for the table in the subquery WHERE sq.lastname = p.lastname -- identify the inner and outer table by its alias names ) family_average -- an arbitrary alias name for the computed family average FROM person p -- 'p' is an arbitrary alias name for the table in the surrounding query ORDER BY lastname, weight;
The subselect gets one row of the surrounding SELECT after the next as an parameter with the name 'p'. Within the subselect all columns of the row 'p' are known and may be used. Here the family name from the outside row is used in the subquery to find all persons within the family and the average weight of the family members.
Be careful: Correlated subqueries are executed once per row of the surrounding query. Therefore they are much more costly than non-correlated subqueries. There might exist an equivalent solution using JOIN or GROUP BY which works with better performance. The query optimizer of the DBMS internally might rearrange the given subquery into one of the equivalent forms. But this does not work in all cases.
The distinction between correlated and non-correlated subqueries is universal. It applies also to the other subquery classes.
This example retrieves one or more persons, whose firstname is the lowest (in the sense of the lexical order) of all firstnames and whose lastname is the lowest of all lastnames. Because of the AND condition it might be the case that no person is found.
-- One resulting row: Elias Baker SELECT * FROM person WHERE (firstname, lastname) = (SELECT MIN(firstname), MIN(lastname) FROM person);
Within the subquery the lowest first- and lastnames are retrieved. The use of the
min function garanties that not more than one row with two columns will arise - therefore it is a row subquery. In the surrounding query this intermediate result is compared with each row of the complete table person or - if present - an index is used.
It's a fortune that the command retrieves a row. In most cases the lowest first- and lastname results from different persons. But also in those cases the command is syntactically correct and will not throw any exception.
In the next example persons with the lowest first- and lastnames within every family are retrieved. To do so, it is necessary to use a correlated row subquery.
-- 7 rows, one per family SELECT * FROM person p WHERE (firstname, lastname) = (SELECT MIN(firstname), MIN(lastname) FROM person sq where p.lastname = sq.lastname);
Again, there are the two incarnations of table person, one with the alias name 'p' in the surrounding query and one with the alias name 'sq' in the subquery. The subquery is called once per resulting row of the surrounding query, because the 'p.lastname' may change with every row of 'p'.
Within every family there is as least one person which achievs the condition - it is also conceivable that several persons achiev the condition.
The next example retrievs persons who have a hobby. The class of the subquery is: non-correlated table subquery (used as a condition in the IN predicate).
SELECT * FROM person WHERE id IN (SELECT person_id FROM contact); -- the subquery
The subquery creates multiple rows with one column for each of them. This constitutes a new, intermediate table. Therefore this example is a table subquery.
The IN operator is able to act on this intermediate table. In contrast, it is not possible to use operators like '=' or '>' on this kind of intermediate result. In this cases the SQL compiler will recognize an syntax error.
The next example is an extention of the first one. It adds a correlation criterion between the query and the subquery by requesting the lastname within an email-address.
-- A correlated table subquery, looking for lastnames within e-mail-addresses SELECT * FROM person p WHERE id IN (SELECT person_id FROM contact c WHERE c.contact_type = 'email' AND UPPER(c.contact_value) LIKE CONCAT(CONCAT('%', UPPER(p.lastname)), '%'));
The last comparision after the AND is a little bit complex. It uses the functions CONCAT and UPPER as well as the predicate LIKE, but this is not of interest for the actual topic 'subquery'. The important part is that the subquery refers to 'p.lastname' of the surrounding query. Only Mr. Goldstein meets the criterion that his e-mail address contains his lastname when the two columns are compared case-insensitive.
Remark: CONCAT concatenates two strings. UPPER converts a string to upper-case. LIKE in combination with the '%' sign looks for one string within another.
Next, there is an example where a non-correlated table subquery is object to a join operation.
-- Persons plus maximum weight of their family SELECT * FROM person p JOIN (SELECT lastname, max(weight) max_fam_weight FROM person GROUP BY lastname ) AS sq ON p.lastname = sq.lastname -- join criterion between subquery table 'sq' and table 'p' ;
The example shows a solution for a common problem. Sometimes there are rows describing an outdated stage of entities. Those rows - for one logical entity - differ from each other in some columns and there is an additional column version to track the time flow.
Here is the example table booking and its data.
-- The table holds actual and historical values CREATE TABLE booking ( -- identifying columns id DECIMAL NOT NULL, booking_number DECIMAL NOT NULL, version DECIMAL NOT NULL, -- describing columns state CHAR(10) NOT NULL, enter_ts TIMESTAMP NOT NULL, enter_by CHAR(20) NOT NULL, -- ... -- select one of the defined columns as the Primary Key CONSTRAINT booking_pk PRIMARY KEY (id), -- forbid duplicate recordings CONSTRAINT booking_unique UNIQUE (booking_number, version) ); -- Add data INSERT INTO booking VALUES (1, 4711, 1, 'created', TIMESTAMP'2014-02-02 10:01:01', 'Emily'); INSERT INTO booking VALUES (2, 4711, 2, 'modified', TIMESTAMP'2014-02-03 11:10:01', 'Emily'); INSERT INTO booking VALUES (3, 4711, 3, 'canceled', TIMESTAMP'2014-02-10 09:01:01', 'John'); -- INSERT INTO booking VALUES (4, 4712, 1, 'created', TIMESTAMP'2014-03-10 12:12:12', 'Emily'); INSERT INTO booking VALUES (5, 4712, 2, 'delivered', TIMESTAMP'2014-03-12 06:01:00', 'Charles'); -- INSERT INTO booking VALUES (6, 4713, 1, 'created', TIMESTAMP'2014-03-11 08:50:02', 'Emily'); INSERT INTO booking VALUES (7, 4713, 2, 'canceled', TIMESTAMP'2014-03-12 08:40:12', 'Emily'); INSERT INTO booking VALUES (8, 4713, 3, 'reopend', TIMESTAMP'2014-03-13 10:04:32', 'Jack'); INSERT INTO booking VALUES (9, 4713, 4, 'delivered', TIMESTAMP'2014-03-15 06:40:12', 'Jack'); -- COMMIT;
The problem is to retrieve all actual rows, which are those with the highest version number within each booking. Bookings are considered to be the same, if they have the same booking_number.
The first solution uses a non-correlated table subquery.
SELECT * FROM booking b WHERE (booking_number, version) IN (SELECT booking_number, MAX(version) FROM booking sq GROUP BY booking_number) -- the subquery ORDER BY booking_number;
The subquery creates a list of booking numbers together with their highest version. This list is used by the surrounding query to retrieve the required rows with all its columns.
The second solution uses a correlated scalar value subquery.
SELECT * FROM booking b WHERE version = (SELECT max(version) FROM booking sq WHERE sq.booking_number = b.booking_number) ORDER BY booking_number;
The surrounding query retrievs all rows of the table. For each of them it calls the subquery, which retrieves the highest version within this study guideing_number. In most cases this highest version differs from the version of the actual row and because of the '=' operator those rows are not part of the result. Only those, whose version is equal to the value determined in the subquery (and whose booking_number is the same as those used in the subquery) are part of the final result.
A variation of the introducing question may be to retrieve only historical rows (all versions except the highest one) for one special booking.
SELECT * FROM booking b WHERE version != (SELECT max(version) FROM booking sq WHERE sq.booking_number = b.booking_number) AND booking_number = 4711 ORDER BY version;
The surrounding query restricts the rows to those of one special booking. The subquery is called only for those rows.
It's easy to run into pitfalls:
-- Unexpected result! SELECT * FROM booking b WHERE version != (SELECT max(version) FROM booking) AND booking_number = 4711 ORDER BY version;
The above query returns all versions of booking 4711 including the actual one! To get the expected result, it's necessary to 'link' the surrounding query and the subquery together.
Find the guideing with the most versions.
-- The subselect return exactly ONE single value. Therefor it's a (non-correlated) single value subquery. -- But this is only a intermediate result. The final result may contain several rows, which is not the case in our example database! SELECT * FROM booking WHERE version = (SELECT MAX(version) FROM booking);
Find all bookings with are canceled (in the latest version).
-- It's necessary to link the subquery with the surrounding query. SELECT * FROM booking b WHERE version = (SELECT MAX(version) FROM booking sq WHERE sq.booking_number = b.booking_number) AND state = 'canceled'; -- Additionally within the resulting rows there must be a correlation between the version and the state. -- This is accomplished with the AND key word at the level of the surrounding query. If the AND works within -- the subquery, the result does not meet the expectations. SELECT * FROM booking b WHERE version = (SELECT MAX(version) FROM booking sq WHERE sq.booking_number = b.booking_number AND state = 'canceled');
Create a list of all persons together with the number of persons which are born in the same city as they itself.
-- The subselect uses the place_of_birth of the outside row. Therefore it's a correlated subquery. SELECT firstname, lastname, place_of_birth, (SELECT COUNT(*) FROM person sq WHERE p.place_of_birth = sq.place_of_birth) cnt -- an arbitrary name for the additional column FROM person p;
Create a list of all persons together with the number of their contact information.
-- The subselect uses the ID of the outside row. Therefore it's a correlated subquery. SELECT firstname, lastname, (SELECT COUNT(*) FROM contact c WHERE p.id = c.person_id) cnt -- an arbitrary name for the additional column FROM person p;
Create a list of all persons together with the number of their e-mail-addresses.
SELECT firstname, lastname, (SELECT COUNT(*) FROM contact c WHERE p.id = c.person_id AND contact_type = 'email' -- The subselect is a complete SELECT. Therefor all elements of -- a 'regular' SELECT may be used: Join, functions, ... and: SUBSELECT ) cnt -- an arbitrary name of the additional column FROM person p;
Create a list of all persons together with the number of their contact information. (Same question as above.)
Replace the subquery by a JOIN construct.
-- Step 1 (for demonstration purpose only): To retrieve ALL persons, it's necessary to use an OUTER JOIN SELECT firstname, lastname, c.contact_type FROM person p LEFT OUTER JOIN contact c ON p.id = c.person_id; -- -- Step 2 (complete solution): Add the counter. To do so, the result must be grouped. SELECT firstname, lastname, count(c.contact_type) FROM person p LEFT OUTER JOIN contact c ON p.id = c.person_id GROUP BY firstname, lastname;
For which persons there are NO contact information?
-- The subquery returns more than one row. Therefore it's a table subquery. SELECT firstname, lastname FROM person WHERE id NOT IN (SELECT person_id FROM contact); -- the subquery
Manage research, learning and skills at defaultLogic. Create an account using LinkedIn or facebook to manage and organize your Digital Marketing and Technology knowledge. defaultLogic works like a shopping cart for information -- helping you to save, discuss and share.