||This article needs attention from an expert in computing, history of science or computer science. The specific problem is: while the longstanding source formatting issue is resolved, the foundational issue of masses of unsourced text, plagiarised and/or WP:OR, demands systematic review by an expert, with return to secondary sourcing as required by WP:VERIFY. (February 2017)|
This article has multiple issues. Please help talk page. (Learn how and when to remove these template messages) or discuss these issues on the(Learn how and when to remove this template message)
A compiler is a computer program (or a set of programs) that transforms source code written in a programming language (the source language) into another computer language (the target language), with the latter often having a binary form known as object code. The most common reason for converting source code is to create an executable program.
The name "compiler" is primarily used for programs that translate source code from a high-level programming language to a lower level language (e.g., assembly language or machine code). If the compiled program can run on a computer whose CPU or operating system is different from the one on which the compiler runs, the compiler is known as a cross-compiler. More generally, compilers are a specific type of translator.
While all programs that take a set of programming specifications and translate them, i.e. create a means to execute those specifications, are technically "compilers", the term generally means a program that produces a separate executable from the compiler (that may require a run time library or subsystem to operate), a compiler that merely executes the original specifications is usually referred to as an "interpreter", although because of differing methods of analyzing what represents compilation and what represents interpretation, there is some overlap between the two terms.
A program that translates from a low-level language to a higher level one is a decompiler. A program that translates between high-level languages is usually called a source-to-source compiler or transpiler. A language rewriter is usually a program that translates the form of expressions without a change of language. The term compiler-compiler is sometimes used to refer to a parser generator, a tool often used to help create the lexer and parser. A compiler is likely to perform many or all of the following operations: lexical analysis, preprocessing, parsing, semantic analysis (syntax-directed translation), code generation, and code optimization. Program faults caused by incorrect compiler behavior can be very difficult to track down and work around; therefore, compiler implementors invest significant effort to ensure compiler correctness.
Software for early computers was primarily written in assembly language. Although the first high-level language is nearly as old as the first computer, the limited memory capacity of early computers led to substantial technical challenges when the first compilers were designed.[discuss]
The first high-level programming language (Plankalkül) was proposed by Konrad Zuse, in 1943. The first compiler was written by Grace Hopper, in 1952, for the A-0 programming language; the A-0 functioned more as a loader or linker than the modern notion of a compiler. The first autocode and its compiler were developed by Alick Glennie, in 1952, for the Mark 1 computer at the University of Manchester and is considered by some to be the first compiled programming language. The FORTRAN team led by John Backus at IBM is generally credited as having introduced the first complete compiler, in 1957. COBOL was an early language to be compiled on multiple architectures, in 1960.[better source needed]
In many application domains the idea of using a higher level language quickly caught on. Because of the expanding functionality supported by newer programming languages and the increasing complexity of computer architectures, compilers have become more complex.
Early compilers were written in assembly language. The first self-hosting compiler - capable of compiling its own source code in a high-level language - was created in 1962 for the Lisp programming language by Tim Hart and Mike Levin at MIT.[non-primary source needed] Since the 1970s, it has become common practice to implement a compiler in the language it compiles, although both Pascal and C have been popular choices for implementation language. Building a self-hosting compiler is a bootstrapping problem--the first such compiler for a language must be compiled either by hand or by a compiler written in a different language, or (as in Hart and Levin's Lisp compiler) compiled by running the compiler in an interpreter.
Compilers enabled the development of programs that are machine-independent. Before the development of FORTRAN, the first high-level language, in the 1950s,[non-primary source needed] machine-dependent assembly language was widely used. While assembly language produces more abstraction than machine code on the same architecture, just as with machine code, it has to be modified or rewritten if the program is to be executed on different computer hardware architecture.
With the advent of high-level programming languages that followed FORTRAN, such as COBOL, C, and BASIC, programmers could write machine-independent source programs. A compiler translates the high-level source programs into target programs in machine languages for the specific hardware. Once the target program is generated, the user can execute the program.
Compiler construction and compiler optimization are taught at universities and schools as part of a computer science curriculum.[non-primary source needed] Such courses are usually supplemented with the implementation of a compiler for an educational programming language. A well-documented example is Niklaus Wirth's PL/0 compiler, which Wirth used to teach compiler construction in the 1970s. In spite of its simplicity, the PL/0 compiler introduced several influential concepts to the field, including uses of:
|This section does not cite any sources. (May 2013) (Learn how and when to remove this template message)|
One classification of compilers is by the platform on which their generated code executes. This is known as the target platform.
A native or hosted compiler is one which output is intended to directly run on the same type of computer and operating system that the compiler itself runs on. The output of a cross compiler is designed to run on a different platform. Cross compilers are often used when developing software for embedded systems that are not intended to support a software development environment.
The output of a compiler that produces code for a virtual machine (VM) may or may not be executed on the same platform as the compiler that produced it. For this reason such compilers are not usually classified as native or cross compilers.
The lower level language that is the target of a compiler may itself be a high-level programming language. C, often viewed as some sort of portable assembler, can also be the target language of a compiler. E.g.: Cfront, the original compiler for C++ used C as target language. The C created by such a compiler is usually not intended to be read and maintained by humans. So indent style and pretty C intermediate code are irrelevant. Some features of C turn it into a good target language. E.g.: C code with
#line directives can be generated to support debugging of the original source.
Higher-level programming languages usually appear with a type of translation in mind: either designed as compiled language or interpreted language. However, in practice there is rarely anything about a language that requires it to be exclusively compiled or exclusively interpreted, although it is possible to design languages that rely on re-interpretation at run time. The categorization usually reflects the most popular or widespread implementations of a language -- for instance, BASIC is sometimes called an interpreted language, and C a compiled one, despite the existence of BASIC compilers and C interpreters.
Interpretation does not replace compilation completely. It only hides it from the user and makes it gradual. Even though an interpreter can itself be interpreted, a directly executed program is needed somewhere at the bottom of the stack (see machine language). Modern trends toward just-in-time compilation and bytecode interpretation at times blur the traditional categorizations of compilers and interpreters.
Some language specifications spell out that implementations must include a compilation facility; for example, Common Lisp. However, there is nothing inherent in the definition of Common Lisp that stops it from being interpreted. Other languages have features that are very easy to implement in an interpreter, but make writing a compiler much harder; for example, APL, SNOBOL4, and many scripting languages allow programs to construct arbitrary source code at runtime with regular string operations, and then execute that code by passing it to a special evaluation function. To implement these features in a compiled language, programs must usually be shipped with a runtime library that includes a version of the compiler itself.
While the typical compiler outputs machine code, there are several other types:
|This section does not cite any sources. (September 2010) (Learn how and when to remove this template message)|
Compilers bridge source programs in high-level languages with the underlying hardware. A compiler verifies code syntax, generates efficient object code, performs run-time organization, and formats the output according to assembler and linker conventions.
In the early days, the approach taken to compiler design used to be directly affected by the complexity of the processing, the experience of the person(s) designing it, and the resources available.
A compiler for a relatively simple language written by one person might be a single, monolithic piece of software. When the source language is large and complex, and high quality output is required, the design may be split into a number of relatively independent phases. Having separate phases means development can be parceled up into small parts and given to different people. It also becomes much easier to replace a single phase by an improved one, or to insert new phases later (e.g., additional optimizations).
The division of the compilation processes into phases was championed by the Production Quality Compiler-Compiler Project (PQCC) at Carnegie Mellon University. This project introduced the terms front end, middle end, and back end.
All but the smallest of compilers have more than two phases. The point at which these ends meet is not always clearly defined.
Classifying compilers by number of passes has its background in the hardware resource limitations of computers. Compiling involves performing lots of work and early computers did not have enough memory to contain one program that did all of this work. So compilers were split up into smaller programs which each made a pass over the source (or some representation of it) performing some of the required analysis and translations.
The ability to compile in a single pass has classically been seen as a benefit because it simplifies the job of writing a compiler and one-pass compilers generally perform compilations faster than multi-pass compilers. Thus, partly driven by the resource limitations of early systems, many early languages were specifically designed so that they could be compiled in a single pass (e.g., Pascal).
In some cases the design of a language feature may require a compiler to perform more than one pass over the source. For instance, consider a declaration appearing on line 20 of the source which affects the translation of a statement appearing on line 10. In this case, the first pass needs to gather information about declarations appearing after statements that they affect, with the actual translation happening during a subsequent pass.
The disadvantage of compiling in a single pass is that it is not possible to perform many of the sophisticated optimizations needed to generate high quality code. It can be difficult to count exactly how many passes an optimizing compiler makes. For instance, different phases of optimization may analyse one expression many times but only analyse another expression once.
Splitting a compiler up into small programs is a technique used by researchers interested in producing provably correct compilers. Proving the correctness of a set of small programs often requires less effort than proving the correctness of a larger, single, equivalent program.
Regardless of the exact number of stages which a compiler is built of, it is common practice to classify them into three phases. These phases are named after the Production Quality Compiler-Compiler Project phases mentioned before.
This front/middle/back-end approach makes it possible to combine front ends for different languages with back ends for different CPUs. Practical examples of this approach are the GNU Compiler Collection, LLVM, and the Amsterdam Compiler Kit, which have multiple front-ends, shared analysis and multiple back-ends.
The compiler frontend analyzes the source code to build an internal representation of the program, called the intermediate representation or IR. It also manages the symbol table, a data structure mapping each symbol in the source code to associated information such as location, type and scope.
While the frontend can be a single monolithic function or program, as in a scannerless parser, it is more commonly implemented and analyzed as several phases, which may execute sequentially or concurrently. This method is favored due to its modularity and separation of concerns. Most commonly today, the frontend is broken into three phases: lexical analysis (also known as lexing), syntax analysis (also known as parsing), and semantic analysis. Lexical analysis and parsing comprise the syntactic analysis (word syntax and phrase syntax, respectively), and in simple cases these modules (the lexer and parser) can be automatically generated from a grammar for the language, though in more complex cases these require manual modification. The lexical grammar and phrase grammar are usually context-free grammars, which simplifies analysis significantly, with context-sensitivity handled at the semantic analysis phase. The semantic analysis phase is generally more complex and written by hand, but can be partially or fully automated using attribute grammars. These phases themselves can be further broken down - lexing as scanning and evaluating, parsing as first building a concrete syntax tree (CST, parse tree), and then transforming it into an abstract syntax tree (AST, syntax tree).
In some cases additional phases are used, notably line reconstruction and preprocessing, but these are rare. A detailed list of possible phases includes:
|This section needs expansion with: with comparable scope of content to the sections above and below. You can help by adding to it. (January 2017)|
The term back end is sometimes confused with code generator because of the overlapped functionality of generating assembly code. Some literature uses middle end to distinguish the generic analysis and optimization phases in the back end from the machine-dependent code generators.
The main phases of the back end include the following:
In addition, the scope of compiler analysis and optimizations vary greatly, from as small as a basic block to the procedure/function level, or even over the whole program (interprocedural optimization). Obviously,[clarification needed] a compiler can potentially do a better job using a broader view. But that broad view is not free: large scope analysis and optimizations are very costly in terms of compilation time and memory space; this is especially true for interprocedural analysis and optimizations.
Interprocedural analysis and optimizations are common in modern commercial compilers from HP, IBM, SGI, Intel, Microsoft, and Sun Microsystems. The open source GCC was criticized for a long time for lacking powerful interprocedural optimizations, but it is changing in this respect. Another open source compiler with full analysis and optimization infrastructure is Open64, which is used by many organizations for research and commercial purposes.
Due to the extra time and space needed for compiler analysis and optimizations, some compilers skip them by default. Users have to use compilation options to explicitly tell the compiler which optimizations should be enabled.
Compiler correctness is the branch of software engineering that deals with trying to show that a compiler behaves according to its language specification.[self-published source?][non-primary source needed] Techniques include developing the compiler using formal methods and using rigorous testing (often called compiler validation) on an existing compiler.
|This section relies largely or entirely upon a single source. (February 2017)|
A number of conferences in the field of programming languages present advances in compiler construction as one of their main topics.
The European Joint Conferences on Theory and Practice of Software (ETAPS) sponsors the International Conference on Compiler Construction, with papers from both the academic and industrial sectors.
Asian Symposium on Programming Languages and Systems (APLAS) is organized by the Asian Association for Foundation of Software (AAFS).
This section has multiple issues. Please help talk page. (Learn how and when to remove these template messages) or discuss these issues on the(Learn how and when to remove this template message)
Assembly language is a type of low-level language and a program that compiles it is more commonly known as an assembler, with the inverse program known as a disassembler. A program that translates from a low-level language to a higher level one is a decompiler. A program that translates between high-level languages is usually called a language translator, source-to-source compiler, language converter, or language rewriter. The last term is usually applied to translations that do not involve a change of language. A program that translates into an object code format that is not supported on the compilation machine is called a cross compiler and is commonly used to prepare code for embedded applications.[clarification needed]
[Quote:] FREE PUBLIC LECTURE.[better source needed]
[Quote:] This memo introduces the brand new LISP 1.5 Compiler... written entirely in LISP and... the first compiler that has ever compiled itself by being executed interpretively.[non-primary source needed]
Manage research, learning and skills at defaultLogic. Create an account using LinkedIn or facebook to manage and organize your IT knowledge. defaultLogic works like a shopping cart for information -- helping you to save, discuss and share.