Oberon-2 (programming Language)

Oberon-2 is an extension of the original Oberon programming language that adds limited reflection and object-oriented programming facilities, open arrays as pointer base types, read-only field export and reintroduces the FOR loop from Modula-2.

It was developed in 1991 at ETH Zurich by Niklaus Wirth and Hanspeter Mössenböck, who is now at Institut für Systemsoftware (SSW) of the University of Linz, Austria. Oberon-2 is a superset of Oberon, and is fully compatible with it. Oberon-2 was a redesign of Object Oberon.

Oberon-2 inherited limited reflection and single inheritance ("type extension") without interfaces or mixins from Oberon, but added efficient virtual methods ("type bound procedures"). Method calls were resolved at run-time using C++-style virtual method tables.

Compared to fully object-oriented programming languages like Smalltalk, in Oberon-2 basic types are not objects, classes are not objects, many operations are not methods, there is no message passing (to a certain extent it can be emulated by reflection and through message extension, as demonstrated in ETH Oberon), and polymorphism is limited to subclasses of a common class (no duck typing like in Python,[1] and it's not possible to define interfaces like in Java). Oberon-2 does not support encapsulation at object/class level, but modules can be used for this purpose.

Reflection in Oberon-2 does not use meta-objects, but simply reads from type descriptors compiled into the executable binaries, and exposed in the modules that define the types and/or procedures. If the format of these structures are exposed at the language level (as is the case for ETH Oberon, for example), reflection could be implemented at the library level. It could therefore be implemented almost entirely at library level, without changing the language code. Indeed, ETH Oberon makes use of language-level and library-level reflection capabilities extensively.

Oberon-2 provides built-in run-time support for garbage collection similar to Java and performs bounds and array index checks, etc. that eliminate the potential stack and array bounds overwriting problems and manual memory management issues inherent in C/C++. Separate compilation using symbol files and name-spaces via the module architecture ensure quick rebuilds since only modules with changed interfaces need to be recompiled.

The language Component Pascal [2] is a refinement (a superset) of Oberon-2.

Example Oberon-2 code

The following Oberon-2 code would implement a very minimal list class:


    (*** declare global constants, types and variables ***)

        List*    = POINTER TO ListNode;
        ListNode = RECORD
            value : Integer;
            next  : List;

    (*** declare procedures ***)

    PROCEDURE (l : List) Add* (v : Integer);
        IF l = NIL THEN
            NEW(l);             (* create record instance *)
            l.value := v
            l.next.Add(v)      (* recursive call to .add(n) *)
    END Add;

    PROCEDURE (l : List) Get*  : Integer;
        v : Integer;
        IF l = NIL THEN
            RETURN 0           (* .get must always return an INTEGER *)
            v := l.value;       (* this line will crash if l is NIL *)
            l := l.next;
            RETURN v
    END Get;

END Lists.

Oberon-2 extensions to Oberon [3]

Type-bound procedures

Procedures can be bound to a record (or pointer) type. They are equivalent to instance methods in object-oriented terminology.

Read-only export

The use of exported variables and record fields can be restricted to read-only access. This is shown with a "-" visibility flag.

Open arrays

Open arrays which previously could only be declared as formal parameter types may now be declared as pointer base types.

FOR statement

The FOR statement of Pascal and Modula-2 was not implemented in Oberon. It is reintroduced in Oberon-2.

Run-time type checking

Oberon-2 provides several mechanisms for checking the dynamic type of an object. For example, where a Bird object might be instantiated to either a Duck or a Cuckoo, Oberon-2 allows the programmer to respond to the actual type of the object at run-time.

The first, most conventional, approach is to rely on the type binding system. The second approach is to use the WITH statement, which allows the dynamic subtype of a variable to be checked directly. In both cases, once the subtype has been identified, the programmer can make use of any type-bound procedures or variables that are appropriate to the subtype. Examples of these approaches are shown below.

Note that the form of WITH statement used in Oberon-2 is unrelated to the Pascal and Modula-2 WITH statement. This method of abbreviating access to record fields is not implemented in Oberon or Oberon-2.

Type binding

 MODULE Birds;
         Bird* = RECORD
             sound* : ARRAY 10 OF Char;
 END Birds.
 MODULE Ducks;
     IMPORT Birds;
         Duck* = RECORD (Birds.Bird) END;
     PROCEDURE SetSound* (VAR bird : Duck);
         bird.sound := "Quack!" 
     END SetSound;
 END Ducks.
 MODULE Cuckoos;
     IMPORT Birds;
         Cuckoo* = RECORD (Birds.Bird) END;
     PROCEDURE SetSound* (VAR bird : Cuckoo);
         bird.sound := "Cuckoo!"
     END SetSound;
 END Cuckoos.

WITH statement

     IMPORT Out, Birds, Cuckoos, Ducks;
         SomeBird* = RECORD (Birds.Bird) END;
         sb : SomeBird;
         c  : Cuckoos.Cuckoo;
         d  : Ducks.Duck;
     PROCEDURE SetSound* (VAR bird : Birds.Bird);
         WITH bird : Cuckoos.Cuckoo DO
              bird.sound := "Cuckoo!"
            | bird : Ducks.Duck DO
              bird.sound := "Quack!"
              bird.sound := "Tweet!"
     END SetSound;
     PROCEDURE MakeSound* (VAR b : Birds.Bird);
     END MakeSound;
 END Test.


 MODULE PointerBirds;
     IMPORT Out;
         BirdRec*   = RECORD
             sound* : ARRAY 10 OF Char;
         DuckRec*   = RECORD (BirdRec) END;
         CuckooRec* = RECORD (BirdRec) END;
         Bird   = POINTER TO BirdRec;
         Cuckoo = POINTER TO CuckooRec;
         Duck   = POINTER TO DuckRec;
        pb : Bird;
        pc : Cuckoo;
        pd : Duck;
     PROCEDURE SetDuckSound* (bird : Duck);
         bird.sound := "Quack!"
     END SetDuckSound;
     PROCEDURE SetCuckooSound* (bird : Cuckoo);
         bird.sound := "Cuckoo!"
     END SetCuckooSound;
     PROCEDURE SetSound* (bird : Bird);
         WITH bird : Cuckoo DO
            | bird : Duck DO
              bird.sound := "Tweet!"
     END SetSound;
     Out.Ln; Out.String(pc^.sound); Out.Ln;
     Out.Ln; Out.String(pd^.sound); Out.Ln;
     Out.Ln; Out.String(pc^.sound); Out.Ln;
     Out.Ln; Out.String(pd^.sound); Out.Ln;
 (* -------------------------------------- *)
 (* Pass dynamic type to procedure         *)
     pb := pd;
     Out.Ln; Out.String(pb^.sound); Out.Ln;
     pb := pc;
     Out.Ln; Out.String(pb^.sound); Out.Ln;
 (* -------------------------------------- *)
     Out.Ln; Out.String(pb^.sound); Out.Ln;
     pb := pd;
     Out.Ln; Out.String(pb^.sound); Out.Ln;
 (* -------------------------------------- *)
     Out.Ln; Out.String(pb^.sound); Out.Ln
 END PointerBirds.

IS operator

A third approach is possible using the IS operator. This is a relation operator with the same precedence as equals (=), greater (>), etc. but which tests dynamic type. Unlike the two other approaches, however, it does not allow the programmer access to the subtype that has been detected.


The development of the ALGOL - Pascal - Modula-2 - Oberon - Component Pascal language family is marked by a reduction in the complexity of the language syntax. The entire Oberon-2 language is described (Mössenböck & Wirth, March 1995) using only 33 grammatical productions in the extended Backus-Naur form, as shown below.

Module        = MODULE ident ";" [ImportList] DeclSeq [BEGIN StatementSeq] END ident ".".
ImportList    = IMPORT [ident ":="] ident {"," [ident ":="] ident} ";".
DeclSeq       = { CONST {ConstDecl ";" } | TYPE {TypeDecl ";"} | VAR {VarDecl ";"}} {ProcDecl ";" | ForwardDecl ";"}.
ConstDecl     = IdentDef "=" ConstExpr.
TypeDecl      = IdentDef "=" Type.
VarDecl       = IdentList ":" Type.
ProcDecl      = PROCEDURE [Receiver] IdentDef [FormalPars] ";" DeclSeq [BEGIN StatementSeq] END ident.
ForwardDecl   = PROCEDURE "^" [Receiver] IdentDef [FormalPars].
FormalPars    = "(" [FPSection {";" FPSection}] ")" [":" Qualident].
FPSection     = [VAR] ident {"," ident} ":" Type.
Receiver      = "(" [VAR] ident ":" ident ")".
Type          = Qualident
              | ARRAY [ConstExpr {"," ConstExpr}] OF Type
              | RECORD ["("Qualident")"] FieldList {";" FieldList} END
              | POINTER TO Type
              | PROCEDURE [FormalPars].
FieldList     = [IdentList ":" Type].
StatementSeq  = Statement {";" Statement}.
Statement     = [ Designator ":=" Expr
              | Designator ["(" [ExprList] ")"]
              | IF Expr THEN StatementSeq {ELSIF Expr THEN StatementSeq} [ELSE StatementSeq] END
              | CASE Expr OF Case {"|" Case} [ELSE StatementSeq] END
              | WHILE Expr DO StatementSeq END
              | REPEAT StatementSeq UNTIL Expr
              | FOR ident ":=" Expr TO Expr [BY ConstExpr] DO StatementSeq END
              | LOOP StatementSeq END
              | WITH Guard DO StatementSeq {"|" Guard DO StatementSeq} [ELSE StatementSeq] END
              | EXIT
              | RETURN [Expr]
Case          = [CaseLabels {"," CaseLabels} ":" StatementSeq].
CaseLabels    = ConstExpr [".." ConstExpr].
Guard         = Qualident ":" Qualident.
ConstExpr     = Expr.
Expr          = SimpleExpr [Relation SimpleExpr].
SimpleExpr    = ["+" | "-"] Term {AddOp Term}.
Term          = Factor {MulOp Factor}.
Factor        = Designator ["(" [ExprList] ")"] | number | character | string | NIL | Set | "(" Expr ")" | " ~ " Factor.
Set           = "{" [Element {"," Element}] "}".
Element       = Expr [".." Expr].
Relation      = "=" | "#" | "<" | "<=" | ">" | ">=" | IN | IS.
AddOp         = "+" | "-" | OR.
MulOp         = "*" | "/" | DIV | MOD | "&".
Designator    = Qualident {"." ident | "[" ExprList "]" | " ^ " | "(" Qualident ")"}.
ExprList      = Expr {"," Expr}.
IdentList     = IdentDef {"," IdentDef}.
Qualident     = [ident "."] ident.
IdentDef      = ident [" * " | " - "].


Oberon-2 compilers maintained by ETH include versions for Windows, Linux, Solaris, Mac OS X.

The Oxford Oberon-2 compiler compiles to native machine code and can use a JIT on Windows, Linux and Mac OS X. It is created/maintained by Mike Spivey and uses the Keiko Virtual Machine.

There is an Oberon-2 Lex scanner and Yacc parser by Stephen J Bevan of Manchester University, UK, based on the one in the Mössenböck and Wirth reference. It is at version 1.4.

There is a release called Native Oberon which includes an operating system, and can directly boot on PC class hardware.

A .NET implementation of Oberon with the addition of some minor .NET-related extensions has also been developed at ETHZ.

Programmer's Open Workbench (POW!)[4] is a very simple integrated development environment, which is provided with editor, linker and Oberon-2 compiler. This compiles to Windows executables. Full source code is provided - the compiler is written in Oberon-2.

The Java to Oberon Compiler (JOB) was written at the University of Vologda in Russia. It produces object code in the form of Java class files (bytecode). Some JOB-specific classes are provided which are Java compatible, but which use a more Oberon-like component hierarchy.

The Optimizing Oberon-2 Compiler compiles to C, using the gcc toolchain for program generation.

Oberon Script is a compiler that translates the full Oberon language into JavaScript. The compiler proper is written in JavaScript and can therefore be called from Web pages in order to process HTML script sections written in Oberon.

XDS Modula2/Oberon2 is a development system by Excelsior LLC, Novosibirsk, Russia. It contains an optimizing compiler for Intel Pentium, or "via-C" translator for cross-platform development. Available for Windows and Linux. The compiler is written on Oberon-2 and compiles itself.

Oberon Revival is a project to bring Oberon 2 and Component Pascal (BlackBox Component Builder) to Linux and Win32. The Linux port of blackbox was not available before and it originally ran only on Microsoft Windows.


Evolution of Oberon and Oberon-2

Detailed papers


External links

  This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.



Connect with defaultLogic
What We've Done
Led Digital Marketing Efforts of Top 500 e-Retailers.
Worked with Top Brands at Leading Agencies.
Successfully Managed Over $50 million in Digital Ad Spend.
Developed Strategies and Processes that Enabled Brands to Grow During an Economic Downturn.
Taught Advanced Internet Marketing Strategies at the graduate level.

Manage research, learning and skills at defaultLogic. Create an account using LinkedIn or facebook to manage and organize your Digital Marketing and Technology knowledge. defaultLogic works like a shopping cart for information -- helping you to save, discuss and share.

  Contact Us