This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (March 2014) (Learn how and when to remove this template message)
|Initial release||August 1991|
|Type of format||Container|
|Extended from||Interchange File Format|
|Extended to||AVI, ANI, PAL, RDIB, RMIDI, RMMP, WAV|
The Resource Interchange File Format (RIFF) is a generic file container format for storing data in tagged chunks. It is primarily used to store multimedia such as sound and video, though it may also be used to store any arbitrary data.
RIFF was introduced in 1991 by Microsoft and IBM, and was presented by Microsoft as the default format for Windows 3.1 multimedia files. It is based on Electronic Arts' Interchange File Format, introduced in 1985 on the Commodore Amiga, the only difference being that multi-byte integers are in little-endian format, native to the 80x86 processor series used in IBM PCs, rather than the big-endian format native to the 68k processor series used in Amiga and Apple Macintosh computers, where IFF files were heavily used.
All chunks have the following format:
Two chunk identifiers, "RIFF" and "LIST", introduce a chunk that can contain subchunks. The RIFF and LIST chunk data (appearing after the identifier and length) have the following format:
The file itself consists of one RIFF chunk, which then can contain further subchunks: hence, the first four bytes of a correctly formatted RIFF file will spell out "R", "I", "F", "F".
More information about the RIFF format can be found in the Interchange File Format article.
The optional INFO chunk allows RIFF files to be "tagged" with information falling into a number of predefined categories, such as copyright ("ICOP"), comments ("ICMT"), artist ("IART"), in a standardised way. These details can be read from a RIFF file even if the rest of the file format is unrecognized. The standard also allows the use of user-defined fields. Programmers intending to use non-standard fields should bear in mind that the same non-standard subchunk ID may be used by different applications in different (and potentially incompatible) ways.
In line with their policy of using .RIFF for all Windows 3.1 "multimedia" files, Microsoft introduced a new variant on the existing MIDI file format used for storing song information to be played on electronic musical instruments. Microsoft's "new" MIDI file format consisted of a standard MIDI file enclosed in a RIFF "wrapper", and had the file extension .RMI. Since the existing MIDI file format already supported embedded "tagging" information, the advantages to the user of having a new format were not obvious.
The MIDI Manufacturers Association have since embraced the RIFF-based MIDI file format, and used it as the basis of an "extended midifile" that also includes instrument data in "DLS" format, embedded within the same .RMI file.
For cataloguing purposes, the optimal position for the INFO chunk is near the beginning of the file. However, since the INFO chunk is optional, it is often omitted from the detailed specifications of individual file formats, leading to some confusion over the correct position for this chunk within a file.
When dealing with large media files, the expansion or contraction of the INFO chunk during tag-editing can result in the following "data" section of the file having to be read and rewritten back to disk to accommodate the new header size. Since media files can be gigabytes in size, this is a potentially disk-intensive process. One workaround is to "pad out" the leading INFO chunk using dummy data (using a "dummy chunk" or "pad chunk") when the file is created. Later editing can then expand or contract the "dummy" field to keep the total size of the file header constant: an intelligently written piece of software can then overwrite just the file header when tagging data is changed, without modifying or moving the main body of the file.
Some programs have tried to address the problem by placing the INFO chunk at the end of a media file, after the main body of the file. This has resulted in two different conventions for chunk placement, with the attendant risk that some combinations of software can cause a file's INFO data to be ignored or permanently overwritten during editing. More sophisticated programs will take into account the possibility of "unexpected" chunk placement in files and respond accordingly. For instance, when the audio-editing program Audacity encounters a .WAV file with end-placed INFO data, it will correctly identify and read the data, but on saving, will relocate the INFO chunk back to the file header.
Although CorelDRAW 10 nominally uses a RIFF file structure, the program's initial release placed the INFO chunk at the end, so that any embedded preview bitmap would not be displayed under Windows' file manager by default. A "patch" utility supplied with the program fixes this problem.
RIFF information tags are found in WAV audio and AVI video files. Tags which are part of the Exif 2.2 specification (Tag ID's beginning with "I") have an underlined tag name in the HTML version of this documentation. Other tags are found in AVI files generated by Sony Vegas video editing software.
|Tag ID||Tag name||Writable||Values / notes|
|DTIM||DateTimeOriginal||N||ICC Profile "dtim" format values|
The field consists of two values (v and v) separated with a space (0x20). Sample code:
// time in seconds - "concatenate" date & time elements with a decimal point delimiter TimeInSeconds = (v * (2^32) + v) * 10^(-7); // shift basis from Jan 1, 1601 to Unix epoch Jan 1, 1970 (369 years & leap days) UnixTimeStamp = TimeInSeconds - 134774 * 24 * 3600;
Manage research, learning and skills at defaultLogic. Create an account using LinkedIn or facebook to manage and organize your Digital Marketing and Technology knowledge. defaultLogic works like a shopping cart for information -- helping you to save, discuss and share.Visit defaultLogic's partner sites below: